Hose Whip Check Nylon 2-ply

Helps to protect workers from injury and your equipment from damage.

To reduce damage to equipment and injury to personnel when hoses accidentally disconnect while under pressure, be sure to use the new One Ply nylon whip check.

Suitable for use on pneumatic, water (high pressure) and hydraulic hoses, these easy to install straps are made from strong, flexible nylon webbing. Slide the rubber grommets (2x) to keep choked eyes snug on the hose.

The available standard length of 75 cm. (30”)  will accommodate hoses with inside diameters from 1/4˝ up to 2˝.

A «whip check» can be attached at any point where two hoses are joined, or to a pumps fluid end at the discharge side, or where a hose attaches to any piece of water jetting equipment such as a water jet lancing or cutting system.

When a high pressure hose is joined to a piece of equipment, the whip check should be used to restrain the movement of the pressurized hose should it become uncoupled, thereby allowing operators to get away and perform a safe, orderly system shut-down.

This Two Ply version is the newest on the market which gives two times extra strength and up to ¼» hose safety of 3.640 bar (52.000 psi).